电话：159 8962 3158
电话：159 8962 3158
二、主要技术参数 Technical Parameters
| 型号 Model | GHSKT010 | |
| 额定负载 Specified load | 10 kg（含夹具、试验件）fixtures, test pieces are included | |
| 台面尺寸（长×宽）Bench Dimension | 200×200 mm | |
| 冲击波形Pulse Wave： | 半正弦波Half sinusoidal wave | |
| 峰值加速度(半正弦波)Shock Impact Peak Acceleration | 150～15000 m/s2 | |
| 脉冲持续时间(半正弦波)Pulse Duration Time： | 0.6～20ms | |
| 外形尺寸（长×宽×高）External Dimension | 1000mm×500mm×2700mm | |
| 设备重量 Weight | 1500 kg | |
| 冲击形式Impact form | 自由跌落Free fall | |
| 最大跌落高度Max. drop height | 1500mm | |
| 电 源 Power Supply | 三相380V，50/60 Hz Three phase 380V，50/60 Hz | |
| 液压源Hydraulic source | 随机配置 With the equipment | |
| 环境条件 | 温度（℃）Temperature | 0～40 |
| Condition | 湿度（25℃）Humidity | ＜85％ |
| 可靠性reliability | 平均无故障积累工作时间≥1000h；Average failure-free accumulation working time ≥ 1000h;半正弦波形发生器连续冲击次数不小于5000次；The half-sine waveform generator has no less than 5000 consecutive impacts;半正弦波形发生器的在干净、常温环境下的存储时间不小于5年。The half-sine waveform generators have a storage time of no less than 5 years in a clean, room temperature environment. | |
| 测控系统Testing system | ShockDAQ冲击、碰撞测量控制系统Impact, collision measurement control system | |
| 适用标准Usage standard | GJB150、GJB360、GJB548、GB/T2423、GJB1217、JJG497、GIEC68-2-27 | |
| 检定标准Testing standard | 加速度幅值、脉宽、均匀度和横向运动比满足JJG541-88的要求。Acceleration amplitude, pulse width, uniformity, and lateral motion ratio meet the requirements of JJG541-88. | |
